Skip to content
Avecas
Avecas

YIELD ENGINEERING

Yield engineering

Turn manufacturing test data into testable failure hypotheses.

Discuss your requirements
Technician handling a removed integrated circuit with tweezers

Representative photograph · Technician handling a removed integrated circuit with tweezers.

THE ENGINEERING SCOPE

Built around
your requirements.

Explore the approach ↓
01

Technical starting point

Wafer maps, lot metadata, test bins and revision history.

02

Acceptance evidence

Sample size, lot effects, retest influence and measurement drift.

03

Delivery package

Yield summaries, failure signatures and experiment recommendations.

CLIENT GUIDE

Scope yield engineering with the right evidence.

Use these technical checkpoints to make the first project review productive.

Provide before the review

  • Wafer maps
  • Lot metadata
  • Test bins and revision history

Review during execution

  • Sample size
  • Lot effects
  • Retest influence and measurement drift

Agree for delivery

  • Yield summaries
  • Failure signatures and experiment recommendations

HOW WE WORK

Clarity at each stage.

01

Clean and segment data

The initial review establishes the baseline using wafer maps, lot metadata, test bins and revision history. Record gaps and dependencies before implementation.

02

Compare distributions

Carry out the agreed work against the reviewed baseline. For yield engineering, keep the interfaces and configuration used by this stage visible to the receiving team.

03

Identify signatures

Retain the intermediate artifacts and review sample size, lot effects, retest influence and measurement drift. Investigate failures before using these results as an input to the next stage.

04

Evaluate corrective experiments

Package yield summaries, failure signatures and experiment recommendations. Review unresolved findings against the agreed acceptance criteria and assign ownership for follow-up.

PROJECT DECISIONS

Know what moves the work forward.

Use these gates to agree readiness, review evidence and responsibility at each stage.

  1. 01

    Baseline ready

    Are the starting inputs complete enough to proceed?

    Review method and evidence

    Wafer maps, lot metadata, test bins and revision history.

    Review evidence

    Record input revisions, missing material and who can resolve each dependency.

  2. 02

    Implementation reviewed

    Has the work addressed the agreed technical objective?

    Review method and evidence

    Turn manufacturing test data into testable failure hypotheses.

    Review evidence

    Keep the intermediate artifacts with review comments and the decisions that changed the design.

  3. 03

    Evidence checked

    Can the result be reproduced and interpreted?

    Review method and evidence

    Sample size, lot effects, retest influence and measurement drift.

    Review evidence

    Capture the configuration, expected result, observed result and unresolved findings.

  4. 04

    Handoff accepted

    Can the receiving team use the delivery package?

    Review method and evidence

    Yield summaries, failure signatures and experiment recommendations.

    Review evidence

    Review build or execution instructions, known limitations and ownership of follow-up actions.

INPUTS & OUTPUTS

What the work involves.

The final statement of work defines the scope and acceptance criteria.

Client inputs
Wafer maps, lot metadata, test bins and revision history.
Engineering sequence
Clean and segment data; compare distributions; identify signatures; evaluate corrective experiments.
Outputs to agree
Yield summaries, failure signatures and experiment recommendations.

TECHNICAL DECISIONS

Planning yield engineering.

Read the technical guide

The engineering objective

Turn manufacturing test data into testable failure hypotheses.

The work starts from wafer maps, lot metadata, test bins and revision history. The team should identify the authoritative revision of each input and record any assumptions needed to proceed. This prevents a later result from being interpreted against a different specification or configuration.

What needs technical attention

Correlation alone does not establish root cause; confirm hypotheses using controlled evidence.

The review centres on sample size, lot effects, retest influence and measurement drift. Each finding should identify the input revision, observed behaviour and supporting evidence. Distinguish a confirmed defect from a configuration issue, an unsupported case or an open engineering question before deciding how to resolve it.

How the work is reviewed

The practical sequence is: clean and segment data; compare distributions; identify signatures; evaluate corrective experiments. Intermediate reviews allow the client to resolve decisions while changes are still manageable. If an input changes, identify the affected activities and repeat the checks that depend on it.

The expected package comprises yield summaries, failure signatures and experiment recommendations. Acceptance criteria should specify what the receiving team needs to reproduce, inspect or integrate these artifacts. Include known limitations and outstanding actions in that package, rather than assuming that delivery of a file implies acceptance.

Link measurements to configuration and sample history

Test and manufacturing-support work relies on traceable device, board and measurement information. Keep sample identity, lot or revision, fixture version, instrument settings and environmental conditions with the results. Establish how limits are chosen and which reference measurements support them. A result without these conditions can be difficult to compare after a fixture, device or software change.

Correlation should precede optimisation. Compare repeated measurements, investigate setup sensitivity and distinguish contact or fixture failures from device behaviour. When looking at yield, segment data by the relevant conditions instead of treating an aggregate trend as a root-cause finding. Changes to test order, settling time or limits can affect the distribution and must be recorded.

Coordinate release requirements with the actual assembly, test or fabrication partner. Confirm the format and ownership of interface files, test programs and acceptance records. Design engineering support does not imply ownership of a manufacturing line, procurement responsibility or qualification authority. Destructive analysis, stress testing and sample consumption need a defined sequence and approval boundary within the project plan.

An illustrative review scenario

A device appears to fail only on one fixture. Repeat the measurement under controlled conditions, compare contacts and calibration, and use a known-good reference where available. Preserve the original failing data before changing the setup. The aim is to distinguish device failure from the measurement chain; this illustration does not establish a diagnosis for an actual sample.

BEFORE WE BEGIN

Project questions.

A clear conversation is the start of a strong engineering relationship.

What inputs are needed for yield engineering?

The starting review needs wafer maps, lot metadata, test bins and revision history. Share the current revision and known limitations so the scope reflects the actual design state.

What does the yield engineering handoff include?

The statement of work can define yield summaries, failure signatures and experiment recommendations. The final package should include review results and any open actions.

Which technical risks need particular attention?

Correlation alone does not establish root cause; confirm hypotheses using controlled evidence.

Can we start with a focused technical review?

The first work package can be a review of the available inputs and the engineering questions that must be resolved. Agree its boundaries, access requirements and expected findings before committing to a larger implementation. A review should leave an actionable list of decisions, dependencies and next steps.

How are changes and unresolved findings handled?

Tie each finding to the relevant revision and supporting evidence. A change should identify the affected interfaces, activities and checks. Confirm its effect on scope and delivery with the responsible owner. At handoff, distinguish closed findings, accepted limitations and open work so that a file transfer is not mistaken for technical acceptance.

PUT THE WORKFLOW IN CONTEXT

Explore the engineering decisions.

Practical reading to help prepare your project discussion. Studies are illustrative; they do not report client results.

Connecting DFT deliverables to manufacturing test ↗

YOUR NEXT CHAPTER STARTS HERE

What will you
build next?

Bring us your engineering challenge.
Let’s define the path from idea to implementation.

Start a conversation